Publicidad
Idiomas disponibles
Idiomas disponibles
Adjusting the Oven Temperature
Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself
with the new oven, you still think that it is too hot or
too cold, you can adjust the oven thermostat yourself.
NOTE
To begin, either raise or lower the thermostat
15 °F (8 °C). Try the oven with the new setting. If
the oven still needs adjustment, raise or lower the
thermostat again, using the first adjustment as a
gauge. For example, if the adjustment was too
much, raise or lower the thermostat 10 °F (5 °C).
If the adjustment was not enough, raise or lower
the thermostat 20 °F (12 °C). Proceed in this way
until the oven is adjusted to your satisfaction.
1
Press and hold Start Time for three seconds.
Then press Start Time repeatedly until U_AJ or
L_AJ appears in the display. U_AJ adjusts the
upper oven and L_AJ adjust the lower oven.
2
To increase the temperature, press plus (+) until
the desired amount appears in the display.
To decrease the temperature, press minus (-)
until the desired amount appears in the display.
3
Press Start to accept the change.
NOTE
This adjustment does not affect the broiling
or Self Clean temperatures. The adjustment
is retained in memory after a power failure.
The oven temperature can be increased (+) or
decreased (-) as much as 35 °F or 19 °C.
Once the temperature is increased or
decreased, the display shows the adjusted
temperature until it is readjusted.
Turning the Preheat Alarm Light On/Off
When the oven reaches its set-temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
You can activate or deactivate the preheating alarm
light.
1
Press and hold Start Time for three seconds.
Then press Start Time repeatedly until PrE
appears in the display.
2
Press plus(+) or minus(-) to turn the function
on/off.
3
Press Start to accept the change.
Adjusting the Beeper Volume
1
Press and hold Start Time for three seconds.
Then press Start Time repeatedly until BEEP
appears in the display.
2
Press plus(+) or minus(-) to select Hi, Lo, Off.
3
Press Start to accept the change.
Selecting Fahrenheit or Celsius
Set the oven temperature display to show either
Fahrenheit (°F) or Celsius (°C) units. The oven
defaults to Fahrenheit unless changed by the user.
1
Press and hold Start Time for three seconds.
Then press Start Time repeatedly until Unit
appears in the display.
2
Press plus(+) or minus(-) to select
F(Fahrenheit) or C(Celsius).
3
Press Start to accept the change.
Adjusting Cooktop On Alert Volume
1
Press and hold Start Time for 3 seconds. Then
press Start Time repeatedly until CtOP appears
in the display.
2
Press plus (+) or minus (-) to select Hi, Lo,
Off.
3
Press Start to accept the change.
Lock Out
The Lock Out feature automatically locks the oven
door and prevents most oven controls from being
turned on. It does not disable the clock, timer or the
interior oven light.
1
Press and hold Lower CLEAR/OFF for three
seconds.
2
The lock melody sounds, Loc appears in the
display, and the lock icon
3
Once the oven door is locked, the lock
indicator stops blinking and remains on.
4
To deactivate the Lock Out feature, press and
hold Lower CLEAR/OFF for three seconds. The
unlock melody sounds and the door and the
controls unlock.
OPERATION
23
blinks in the display.
Publicidad
