Hkoenig MSX254 Manual De Utilización página 10

• Unplug. • Check that the movable bulkhead is closed
(graduated knob (6) in position "0"). • Carefully clean the part of
the blade to be sharpened. • Reinsert the plug. • Loosen the
locking knob (23) of the sharpener group (10). • Raise the
sharpener group (10), turning it by 180° so that both wheels are
in working position. See Fig. 1. • Lower the sharpener group
(10) until it locks. • Secure the group by turning the locking knob
(23). See Fig. 2. • Switch on. • Press button (26) and let the
blade turn for about 1 minute. When the blade is still, check to
see if any burr has formed on the edge. • After having verified
the presence of burr, switch (5) on and gently press button (27)
for about 3 seconds to remove the burr produced during
sharpening. Put the graduated knob (6) back to "0" position. •
After sharpening, move the sharpener group (10) back to its
original position, see Fig. 3 and clean the edge of the blade and
the wheels by alcohol. • After several sharpening operations,
remove any residue from the sharpening wheel with alcohol and
a brush.
BLADE REPLACING
The blade has to be replaced when it is no more possible to
sharpen it or when the distance between the cutting part of the
blade and the blade protector is more than 6 mm. Return
appliance to the nearest authorized service facility to replace
the blade.
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products.
There is a separation of this waste product into communities, you will need
to inform your local authorities about the places where you can return this
product. In fact, electrical and electronic products contain hazardous
substances that have harmful effects on the environment or human health
and should be recycled. The symbol here indicates that electrical and electronic
equipment should be chosen carefully, a wheeled waste container is marked with a
cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 05