Descargar Imprimir esta página

Ryobi RLM4114 Traducción De Las Instrucciones Originales página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
Danger of Ricochet. Keep all
bystanders at least 15 m away.
To reduce the risk of injury or damage,
avoid contact with any hot surface.
Do not smoke and stay away from open
fl ames and sparks when fi lling fuel tank
or when handling fuel.
Mow when the catcher is empty
Stop mowing when the catcher is full.
Do not touch the hot metal surface.
Before performing maintenance,
remove the spark plug socket.
Loosen fuel cap slowly to release
pressure and to keep petrol from
escaping around the cap.
Carefully pour petrol into the tank.
Push the primer bulb 3 times.
Hold the operator presence control
down against the handle.
Pull the starter cord until the engine
runs.
Mow across the surface of the slope.
Avoid mowing up and down.
Remove objects that could be thrown by
STOP
the rotating blade.
Keep bystanders a safe distance away
from the machine.
Fuel and its vapours are explosive and
can cause severe burns or death.
Fuel and its vapors are extremely
fl ammable and explosive. Fire can
cause severe burns or death.
4
Use unleaded petrol intended for motor
vehicle use with an octane rating of 87
[(R + M)/2] or higher.
Use SAE 30 or 10W-30 API-SJ weight
oil.
Conforms to all regulatory standards in
the country in the EU where the product
is purchased.
EurAsian Conformity Mark
Ukrainian mark of conformity
Hold the operator presence control
down against the handle to keep engine
running. Release the operator presence
control to stop the product.
Guaranteed sound power level is 96 dB.
Self-propel: The lawn mower will propel
itself when the drive control lever is
pulled towards the handle.
Stop the product.
DESCRIPTION
See figure 1.
1. Primer Bulb
2. Oil Cap/Dipstick
3. Fuel Cap
4. Starter Grip
5. Handle Knob
6. Air Filter
7. Operator Presence Control
8. Grass Catcher
9. Height Adjustment Lever
10. Drive Control
11. Rear Discharge Door
12. Spark Plug Boot
13. Rope Guide Knob
ASSEMBLY
UNPACKING
The product requires assembly.
Carefully inspect the product to make sure no breakage
or damage occurred during shipping.
If any parts are damaged or missing, please call your
Ryobi service centre for assistance.
English

Publicidad

loading