Cameo ZENIT W300i Manual De Usuario página 24

Dimmer curves
linear
DMX value
SYSTEM INFORMATION (System Info)
Press MODE to access the main menu (--- Menu ---). Using the UP and DOWN controls, select
System Info(observe arrow) and confirm with ENTER.
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
Use the UP and DOWN controls to select the desired submenu item, and press ENTER to display
the corresponding information.
System Info
Firmware = Displays
Temperature = Displays temperature of LED
Operation = Displays operating time
Hours
MANUAL LOCKING FUNCTION
In addition to the ability to automatically protect the lamp from accidental and unauthorised
operation (see "Settings" - "Auto-lock"), the controls can also be locked manually. Press and hold
the UP and DOWN controls simultaneously for approximately 5 seconds. If an attempt is made to
change settings, "Locked!" will appear in the display, and changing the spotlight's settings via
the controls is no longer possible. After approx. 1 minute, the current operating mode is displayed
again. To unlock, press and hold the UP and DOWN controls simultaneously for approximately 5
seconds. The display will show the previously displayed information.
24
exponential
DMX value
device firmware
unit
logarithmic
DMX value
Main CPU Vx.xx
LED Vx.xx
Driver
LED xx °C / xx °F
Unit °C (= display in degrees Celsius)
°F (= display in degrees Fahren-
heit)
xx:xx h Displays total operating time in
hours and minutes
S-curve
DMX value