Publicidad
Idiomas disponibles
Idiomas disponibles
4. Lift the parallel outlet cover on both generators.
Plug the black and red parallel cable leads to the
black parallel ports on each corresponding
generator control panel. Connect the yellow/green
leads to the ground terminal on each generator
and tighten the nut.
NOTE:
DO NOT connect two red leads or two black leads
into the same generator.
Generator
1
Black Cable
Black
Outlet
Red
Outlet
Ground
Terminal
5. Start one of the generators and wait until the
OUTPUT READY INDICATOR LED illuminates.
6. Start the second generator and wait until the
OUTPUT READY INDICATOR LED illuminates
before connecting a load.
7. Plug in and turn on the desired 120 AC, single
phase, 60Hz electrical loads. It is better to attach
the item with largest load first. The total power of
2880W may be drawn from L5-30R (30A-120V)
outlet.
Always unplug all loads before stopping the
generators.
Generator
Red Cable
Yellow/Green Cable
Terminal
2
Black
Outlet
Red
Outlet
Ground
Page 19
Publicidad
