Descargar Imprimir esta página

BH FITNESS BZ6260 Instrucciones De Montaje Y Utilización página 18

Ocultar thumbs Ver también para BZ6260:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
-Solvent based lubricants used,
- Belt is too tight.
Plug the unit into a wall socket with an
EARTH terminal. Set switch (L) to
Position [1].
ASSEMBLY INSTRUCTIONS.-
The assistance of a second person
is advisable for the assembly work.
Make sure that all of the pieces are
there, Fig.0:
(1) Main structure; (17) Screwdriver;
(15) Allen wrench; (46) Water bottle
holder; (22) Safety key; (27) Left upright
tube cover; (28) Right upright tube
cover; (107) Tornillo M5x12; (101)
Tornillo M8x15; (117) Arandela D8.
Follow the instructions step by step to
assemble:
1 Take the unit out of the box and
place it on the floor as shown in Fig.1.
Please do not cut packing belt (F)
before you finish assembly.
2 Loose the bolt (101) on main frame
(1) and remove with safety block (7),
Fig.2.
3 Next, hold of the handrails and lift
them in the direction of the arrow, as
shown in Fig.3. Use screws (101) and
washers (117) to secure, Fig.4.
Fig.B
4 Use the screws (101) and the
washers (117) to fix the console (3),
Fig.5.
5 Place the left (27) and right (28)
covers, as shown in Fig.6.
6 Place the bottle holders (46), Fig.7.
Remove the packing belt (F), Fig.7.
FOLDING YOUR UNIT.-
This treadmill is equipped with a
folding
mechanism
purposes. To use it, stop the treadmill,
lower the elevation level to minimum,
unplug the mains cable and lift the unit
until you hear lever (J) click into place,
Fig.8. Store your unit in a dry place,
preferably not subject to changes in
temperature.
UNFOLDING YOUR UNIT.-
If you wish to use the treadmill, do the
reverse procedure. Use your foot to
press lever (J) as shown in Fig.8 and
slowly lower the treadmill belt down to
the floor.
When folding or unfolding the treadmill
make sure that there are no children
about or obstacles that might hinder
the folding motion.
MOVEMENT & STORAGE.-
The unit is equipped with wheels (36),
Fig.9, to make it easier to move. Make
sure that the mains cable is unplugged
from the wall socket.
If you wish to move the treadmill, the
first thing to do is to fold it up, place
your hands on the handrails (G & H)
and tilt the treadmill, Fig.9, so that the
wheels (36) rest on the floor.
To prevent accidents DO NOT move
the treadmill across uneven floors.
18
for
storage

Publicidad

loading