Publicidad
Idiomas disponibles
Idiomas disponibles
Auxiliary function
Cancel audio warning
Your dryer will give an audio warning when the
programme comes to an end. If you do not want to
hear the audio warning, press "Cancel Audio Warning"
button. The relevant light will turn on when this button is
pressed and an audio warning will not be given when the
programme comes to an end.
C
You can select this function either before or after the
programme starts.
Warning indicators
C
Warning indicators may differ according to the model
of your dryer.
Filter cleaning
A warning light will turn on to remind filter cleaning after
the programme finishes.
C
If the filter cleaning warning light lights up
continuously, please refer to, "Suggested solutions for
problems".
Water tank
Warning light starts flashing when the tank is filled with
water. The dryer stops operating if the warning light turns
on when a programme is running. Drain the water in
the water tank to restart the dryer. Press "Start/Pause/
Cancel" button to start the programme after you have
emptied the water tank. The warning light turns off and
the programme resumes operating.
Starting the programme
1. Press "Start/Pause/Cancel" button to start the
programme.
2. Light of the "Start/Pause/Cancel" button will turn on
to indicate that the programme has started.
Progress of program
Progress of a running program is shown through the
program follow-up indicator.
At the beginning of every program step, the relevant
indicator LED will light up and light of the completed step
will turn off.
"Drying":
- Drying level will be illuminated during the whole drying
process until the drying degree reaches "iron dry".
"Iron Dry":
- Starts to illuminate when the drying degree reaches
"iron dry" step and remains illuminated until the next
step.
"Ready to wear":
Starts to illuminate when the drying degree reaches
"Ready to wear" step and remains illuminated until the
next step.
"Final / Anti-creasing":
- Illuminates when the program comes to an end and
anti-creasing function is activated.
C
If more than one LED light up or flash concurrently,
it means there is malfunctioning or a failure (please
see, Solution suggestions for problems).
Changing the programme after it has started
You can use this feature to dry your clothes under higher
or lower temperatures after your dryer has started.
For example;
1. Press and hold the "Start/Pause/Cancel" button for
about 3 seconds to "Cancel" the programme in order
to select "Extra Dry" programme instead of "Iron Dry"
programme.
2. Select the "Extra Dry" programme by rotating the
programme selection button.
3. Press "Start/Pause/Cancel" button to start the
programme.
C
Press "Start/Pause/Cancel" button for 3 seconds
to cancel the programme or turn the programme
selection knob in any direction to end the programme
while the machine is running. Water tank and filter
cleaning warning lights turn on to warn the user when
the programme is cancelled by pressing the "Start/
Pause/Cancel" button for 3 seconds. However, the
warning lights do not turn on when the programme
is cancelled by turning the programme selection
knob. Only the drying light turns on and the machine
remains in hold until a new programme is selected
and the "Start/Pause/Cancel" button is pressed.
Child-proof lock of the machine should not be active
in order to perform these two operations. If the child-
proof lock is active, deactivate it before performing
these operations.
Adding/removing laundry in standby mode
In order to add or remove laundry after the programme
starts:
1. Press the "Start/Pause/Cancel" button to switch the
dryer to "Pause" mode. Drying process will stop.
2. Open the door at "Pause" position and close it again
after adding or taking out laundry.
3. Press "Start/Pause/Cancel" button to start the
programme.
C
Any laundry added after the drying process has
started may cause the dried clothes in the machine
intermingle with wet clothes and the result will be wet
laundry after the drying process is over.
C
Laundry may be added or taken out as much as
desired during a drying process, but this process will
extend the programme duration and increase energy
consumption since the drying will be interrupted
continuously. Therefore, it is recommended to add
laundry before the drying programme has started.
Child-proof lock
There is a child-proof lock to prevent any programme
interruption due to the pressing of button while the
programme is running. The loading door and all buttons
except the "On/Off" button on the control panel are
deactivated when the child-proof lock is active.
Press the "Start/Pause/Cancel" and "Cancel audio
warning" buttons simultaneously for 3 seconds to activate
14 EN
Publicidad
