Publicidad
Idiomas disponibles
Idiomas disponibles
Adjustments and settings in the menu (continued)
Black Level
[3-1] Lens Control
RS50
RS50
VS21
Focus
Zoom
Shift
Image Pattern
On
Off
Lock
On
Off
[3-2] Pixel Adjust
Horiz. Red
Horiz. Green
Horiz. Blue
Vert. Red
Vert. Green
Vert. Blue
Sets the black level when used indoors.
Settings: 0 to 10
It controls each motorized functions of the lens during the projector-installation.
This function is used to adjust the focus.
This function is used to adjust the zoom.
This function is used to adjust the shift.
It is possible to adjust the projection screen during adjustment of the focus zoom shift.
Settings: On, Off
During the adjustment, the image pattern is displayed.
The image pattern is displayed in conjunction with the above setting items.
The external input signal is displayed without displaying the image pattern.
This sets the lens control to on/off.
Settings: On, Off
It is not possible to adjust the above setting items. If the remote control button "LENS"
button is pressed, a warning message is issued.
This functions as lens control function.
This fine tunes each slight color errors in the horizontal/vertical directions of the video
images in units of 1 pixel.
(*) It is impossible to match all image pixels on the screen. Due to the equipment, there
will always be some gaps.
(*) In case the image is reversed, or upside-down, the horizontal and vertical directions
are reversed.
(*) Please perform adjustments on a clear still picture.
(*) For fine tuning, the effects of adjustments may be difficult to understand for some
video images.
(Move red to the left) 1 to 5 (Move red to the right)
(Move green to the left), 1 to 5 (Move red to the right)
(Move blue to the left) 1 to 5 (Move red to the right)
(Move red down) 1 to 5 (Move red up)
(Move green down) 1 to 5 (Move green up)
(Move blue down) 1 to 5 (Move blue up)
ENGLISH
[0]
[On]
[Off]
[3]
[3]
[3]
[3]
[3]
[3]
49
Publicidad
