Descargar Imprimir esta página

JVC DLA-VS2100 Manual De Instrucciones página 58

Publicidad

Idiomas disponibles

Idiomas disponibles

4
Replacing the Lamp
The lamp is a consumable item. If the image is dark or the lamp is turned off, replace the lamp
unit.
When the lamp replacement time approaches, a message is displayed on the screen and the condition
is indicated by the indicator. (Reference page: 14 to 15, 66)
CAUTION
Do not insert your hands into
the opening of the lamp!
This could cause obvious
deterioration of the
equipment's function, wounds
and electric shocks.
Do not replace the lamp
immediately after the unit has
been used, and allow a cooling
period of 1 hour or more before
replacement. The temperature
of the lamp is still high and this
may cause a burn.
Do not apply shock to the
lamp unit. It may cause lamp
blowout.
Do not use flammable air duster
to clean the internal parts of the
unit. This may cause fire.
MEMO
Usable Lamp Life
When using the "Lamp Power"
set at "Normal", the lifetime of
the lamp will be approximately
3000 hours.
This is an average lifetime and
cannot be guaranteed.
The lamp life may not reach
3000 hours depending on the
operating conditions.
When the lamp has reached
the end of its usable life,
deterioration progresses
rapidly.
If the picture becomes dark,
the tint becomes strange, or
the image flickers, promptly the
lamp unit for a new one.
Purchasing the Lamp Unit
Please consult your authorized
dealer.
■ Lamp Unit
Part No.: PK-L2210U
58
Maintenance
Lamp replacement procedure
1
2
3
4
Remove the power plug from the
outlet
Remove the lamp cover
Remove the screws with a
Loosen the screws on the lamp unit
Loosen the screws with a
Pull out the lamp unit
Grasp the handle and pull out the lamp unit.
screwdriver.
screwdriver.
Handle

Publicidad

loading

Este manual también es adecuado para:

Dla-vs2100nl