Publicidad
Idiomas disponibles
Idiomas disponibles
h.
LED display
4.
Air outlet louvre
5.
Handles
6.
Top water outlet plug for the
dehumidifying function
7.
Power cord winding hooks
8.
Lower air intake grille with fi lter
9.
Power cord
10. Bottom water drain plug
11. Air outlet
12. Remote control storage pocket
13. Upper air intake grille with fi lter
14. Remote control
a.
Power switch (POWER)
b.
Mode selection button (MODE)
c.
Airfl ow speed selection button
(FAN)
The cooling system of the air conditioner is fi lled with 265g of R290 refrigerant, which has low
global warming potential (GWP): 3
CAUTION! The R290 refrigerant is a fl ammable gas. Take extreme care. Fire hazard.
AIR CONDITIONER INSTALLATION
GENERAL
1. Unpack the appliance and remove all plastic bags, labelling stickers and transport locks. Al-
ways hold and carry the appliance in an upright position.
CAUTION! Leave the air conditioner upright for a minimum of 24 hours before the fi rst use to allow the refrig-
erant to stabilize after transport.
2. Identify all parts of the appliance. Carefully check the parts for any possible transport dam-
age. In case of suspected damage, do not start the appliance and contact the seller.
3. Place the air conditioner on a fl at, horizontal surface.
4. Do not install or operate the air conditioner in a bathroom or other wet rooms.
APPLIANCE ASSEMBLY
1. Put two 1.5V AAA batteries in the remote
control (14).
CAUTION! The batteries are not included with the
air conditioner.
d.
Increase value „+" button (UP)
e.
Reduce value „-" button (UP)
f.
Delayed start/stop selection
button (TIMER)
g.
Air outlet louvre swing button
(SWING)
h.
Celsius/Fahrenheit display mode
button
i.
LCD display
15. Hot air exhaust duct
16. Flex tube adapter
17. Mounting ring
18. Mounting kit for sliding windows
19. Remote IR receiver
20. Draining hose
Fig. 1
Publicidad
