Descargar Imprimir esta página

Maytag Performa PAVT-2 Guía De Uso Y Cuidado página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

STEP
3
Select Options
Extra Rinse
When the knob is in the on position, an additional
rinse at the end of the Regular cycle is provided to
more completely remove laundry additives, suds,
perfumes, etc.
STEP
4
Select Cycle
To select a cycle, push the control dial in (off position)
and turn it to the right (clockwise) until the pointer is at
the number of minutes needed for the wash load in the
Regular, Permanent Press or Delicates cycles.
Regular Cycle
Provides normal agitation and normal spin speeds to
wash cottons and heavily soiled items.
Permanent Press Cycle
Provides normal agitation speed for the first six
minutes, a pause, then slow agitation for the rest of the
wash cycle to protect wrinkle-free fabrics. Spin speed
will be normal to reduce water retention.
Delicates Cycle
Provides slow agitation speed and slow spin speed for
delicates and knits.
(if desired)
Control features vary by model.
STEP
5
Pull Control Dial Out to Start
You may stop the washer at any time by simply
pushing the control dial in. Therefore it is possible to
obtain a non-agitated soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed in (off position) when you change the setting.
Note:
Do not attempt to turn the control dial
counterclockwise. Damage to the timer will result.
6

Publicidad

loading