Publicidad
Idiomas disponibles
Idiomas disponibles
Using the HDMI Control
On-screen control panel
For an AV system
Switches the surround mode in order
1
HDMI Control
5
Switches the input source in reverse order
2
! ! ! !
Switches the surround mode in reverse order
3
1
SURROUND+
6
Closes the screen to return to the HDMI Control
4
2
7
menu
INPUT-
INPUT+
Displays the model number of the connected
5
3
device
SURROUND-
Void
6
4
HDMI CONTROL
HDMI CONTROL
Exit
Switches the input source in order
7
Press
or
on the remote control unit of the plasma display to
switch the surround mode in order or in reverse order,
switch the input source in order or in reverse order. Pressing
HDMI CONTROL turns the control panel screen off to return to
the HDMI Control menu.
Note
• You cannot operate the recorder/player when you press
to switch the input source during operation. To resume the
operation, return to the HDMI Control menu and select the
desired function again.
For a recorder
Skips commercials
1
HDMI Control
5
Fast reverse
2
! ! ! !
Stops playback
3
1
6
Closes the screen to return to the HDMI Control
4
2
7
menu
Displays the model number of the connected
5
3
device
Starts playback
6
4
HDMI CONTROL
HDMI CONTROL
Exit
Fast forward
7
Press
or
on the remote control unit of the plasma display to
select fast reverse or fast forward mode,
or
to stop playback. Pressing ENTER starts playback and
HDMI CONTROL turns the control panel screen off to return to
the HDMI Control menu.
For a player
Displays the DVD disc menu or Blu-ray disc's pop-
1
HDMI Control
5
up menu on the player
! ! ! !
Fast reverse
2
1
6
Stops playback
3
MENU
2
7
Closes the screen to return to the HDMI Control
4
menu
3
Displays the model number of the connected
5
device
4
HDMI CONTROL
HDMI CONTROL
Exit
Starts playback
6
Fast forward
7
Press
or
on the remote control unit of the plasma display to
select fast reverse or fast forward mode,
disc menu or Blu-ray disc's pop-up menu on the player or
stop playback. Pressing ENTER starts playback and HDMI
CONTROL turns the control panel screen off to return to the
HDMI Control menu.
Making the HDMI Control connections
When you make changes in connections between the plasma
display and the device(s) that supports the HDMI Control
functions or settings for the "HDMI Control Setting", perform the
following procedure:
1
Turn on the plasma display and all the connected devices.
2
Confirm that the setting in "Input Setting" for "HDMI Control
Setting" is properly entered according to the connected
devices. Also confirm the HDMI Control related settings in
the connected devices.
3
Switch to the HDMI input terminals to which the devices are
or
to
connected to check if audio and video images are properly
output and displayed.
4
Try turning off the plasma display, then turn the power back
on to the plasma display.
Connecting an AV amp/BD player
or
to skip commercials
AV cable
(commercially
available)
to display the DVD
to
4
5
Rear view
4
5
Optical digital
cable
(Commercially
available)
AV amp
BD player
13
HDMI compliant
cable (HDMI
cable having the
HDMI mark)
75
En
Publicidad
