Descargar Imprimir esta página

Hart HGCS01 Manual Del Operador página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

ASSEMBLY
UNPACKING
This product requires assembly.
 Carefully remove the product and any acces-
sories from the box. Make sure that all items
listed in the Packing List are included.
WARNING:
Do not use this product if any parts on the
Packing List are already assembled to your
product when you unpack it. Parts on this
list are not assembled to the product by the
manufacturer and require customer installa-
tion. Use of a product that may have been
improperly assembled could result in serious
personal injury.
 Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
 Do not discard the packing material until you
have carefully inspected and satisfactorily oper-
ated the product.
 If any parts are damaged or missing, please call
1-800-776-5191 for assistance.
PACKING LIST
Chain Saw with Scabbard
Safety tip
Scrench
Operator's Manual
WARNING:
If any parts are damaged or missing do not op-
erate this product until the parts are replaced.
Use of this product with damaged or missing
parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or
create accessories not recommended for
use with this product. Any such alteration or
modification is misuse and could result in a
hazardous condition leading to possible seri-
ous personal injury.
WARNING:
To prevent accidental starting that could
cause serious personal injury, always remove
the battery pack from the product when as-
sembling parts.
MOUNTING THE SAFETY TIP NOSE GUARD
See Figures 5 - 6.
 Remove the battery prior to assembling the pruner.
 Mount the safety tip on the bar nose.
 Fit the locking tab in the recessed slot in the
guide bar.
 Tighten the mounting screw with wrench until
snug.
 From the snug position, tighten the mounting
screw an additional 3/4 of a turn using a wrench.
 Check the security of the safety tip nose guard
and its mounting screw before each use of the
chain saw.
FIG. 5
MOUNTING
SCREW
FIG. 6
TIGHTEN 3/4
OF A TURN
13 – English
SAFETY TIP

Publicidad

loading