Publicidad
Idiomas disponibles
Idiomas disponibles
English / USA
STOP
0
3
4
When engine begins to fire:
:
Move Master Control lever (3) to n
and continue cranking – as soon
as engine runs, immediately
blip the throttle trigger (4) –
the Master Control lever (3) will
move to the "Run" position # (5)
and the engine will settle down to
idling speed.
.
As the chain brake is still engaged,
the engine must be returned to
idling speed immediately – or the
engine and chain brake might
otherwise be damaged.
36
5
:
Pull the hand guard back toward
the front handle:=
The chain brake is now disengaged
– your saw is ready for operation.
Always disengage chain brake
before accelerating engine. High
revs with the chain brake engaged
(chain locked) will quickly damage
the powerhead and chain drive
(clutch, chain brake).
:
Observe safety precautions.
:
Always check operation of chain
lubrication before starting work.
To shut down the engine:
:
Move Master Control lever to $
At very low outside temperatures:
Allow engine to warm up
As soon as the engine runs:
:
Blip the throttle trigger to disengage
it from starting throttle position –
Master Control lever will move to
"Run" position # and the engine will
settle down to idling speed.
:
Disengage chain brake:
Pull the hand toward the front
handle.
:
Open throttle slightly – warm up
engine for short period.
.
MS 200
Publicidad
