Publicidad
Idiomas disponibles
Idiomas disponibles
:
Release clutch hexagon clockwise
(left-hand thread).
:
Unscrew the clutch.
:
Pull the chain sprocket (3) and
needle cage (4) off the crankshaft.
:
Clean the crankshaft stub and
needle cage, and lubricate with
STlHL grease ("Special
Accessories").
MS 200
Assembly
:
Push needle cage and chain
sprocket onto the crankshaft.
:
Screw the clutch onto the crankshaft
(counterclockwise).
:
Tighten down the clutch firmly.
:
Remove locking strip from the
cylinder. Fit the spark plug and
tighten it down firmly.
:
Refit boot on the spark plug.
English / USA
47
Publicidad
