Fein 7 129 09 Instrucciones De Uso página 16

OBJ_BUCH-0000000029-001.book Page 16 Wednesday, February 16, 2011 8:27 AM
en
16
Storage.
Before mounting or replacing
WARNING
application tools or accesso-
ries, remove the battery. This preventive
safety measure rules out the danger of injuries
through accidental starting of the power tool.
Repair and customer service.
Service.
Have maintenance carried out
WARNING
only through qualified person-
nel. Incorrectly mounted leads and compo-
nents can cause serious injuries. Have the
required service carried out only through a
FEIN customer service agent.
Cleaning.
Remove the battery prior to
WARNING
any maintenance and cleaning.
This preventive safety measure rules out the
danger of injuries through accidental starting
of the power tool.
Warranty and liability.
The warranty for the product is valid in
accordance with the legal regulations in the
country where it is marketed. In addition,
FEIN also provides a guarantee in accordance
with the FEIN manufacturer's warranty decla-
ration.
The delivery scope of your power tool may
include only a part of the accessories
described or shown in this instruction man-
ual.
For storage of the power tool, remove the
application tool, shut the clamping lever, and
then press in the fastening element.
When using in environments
WARNING
with conductive dust in the air,
such as when working metals, this dust can
settle in the interior of the power tool. There-
fore, regularly blow out the interior of the
power tool from outside via the ventilation
openings with dry, oil-free compressed air;
always wear eye protection when doing this.
Do not attempt to clean
CAUTION
clogged or dirty ventilation
openings of the power tool with pointed
metal objects; use non-metal tools or objects
for this.
Do not use cleaning agents
CAUTION
and solvents that can cause
damage to plastic parts. These include: Gaso-
line, carbon-tetrachloride, chloric solvents,
ammonia and domestic cleaning agents that
contain ammonia.
Environmental protection, dis-
posal.
Packaging, worn out power tools and acces-
sories should be sorted for environmental-
friendly recycling.
Dispose of batteries only when discharged.
For batteries that are not completely dis-
charged, insulate the terminals with tape as a
protective measure against short-circuiting.