Publicidad
Idiomas disponibles
Idiomas disponibles
USE & TIPS
User interface introduction
Temperature Setting
o Push "TEMP" button, the LED number would be glistening, you could adjust the
temperature by pushing "Setting" button.
o The setting is cycling to change from -16 to -22°C.
o After 5 seconds, the setting temperature is confirmed.
Mode
o When firstly push "MODE" button, the lamp "SUPER" is lighted on, and the appliance
would be fast freezing and the LED displays "SF" (super freezing).
o When secondly push "MODE" button, the fasting freezing lamp black out, and the "ECO"
lamp is lighted on, the appliance would go into "ECO" mode, the appliance will run with
the setting at -16° and the LED will display "SE" (save energy).
o When you thirdly push "MODE" button, both of lamps of "SUPER" and "ECO" black out,
the appliance would be back to setting mode by user.
Lock
o When push "MODE" and "Setting" buttons at the same time for 3 seconds, buttons
will be locked and the lamp lighted on.
o If you want to unlock the buttons, push "MODE" and "SETTING" at the same time 3
seconds again.
Turn off
o Push and hold "Setting" button for 5 seconds and switch off the appliance.
o To switch on, push and hold "Setting" button for 5 seconds again.
Door open alarm
Publicidad
