3.2 Safety information in this manual
• Regularly check the glass plate of the base of the
device for scratches, cracks and chipped areas. If
you find such damage, have the glass plate
replaced with a new one.
• Lay the mains cable so that there is no risk of tripping.
• Only use the type of battery specified (see "Insert
batteries" on page 84).
• Have the scales serviced and recalibrated regularly
(see "Maintenance/Recalibration" on page 121).
• Make sure that maintenance and repair are only
carried out by an authorised service partner. You
can find your local service partner at www.seca.com
or send an e-mail to service@seca.com.
• Make sure you only use genuine seca accessories
and spare parts. Otherwise the warranty provided
by seca will become null and void.
• Make sure RF equipment such as mobile phones is
kept at a minimum distance of approx. 1metre to
prevent incorrect measurements or interference with
the wireless transmission.
DANGER!
Used to identify an extremely hazardous situation.
If you fail to take note of this information, serious
irreversible or fatal injuries will occur.
WARNING!
Used to identify an extremely hazardous
situation. If you fail to take note of this
information, serious irreversible or fatal injuries
may result.
CAUTION!
Used to identify a hazardous situation. If you fail
to take note of this information, minor to
moderate injuries may result.
ATTENTION!
Used to identify possible incorrect usage of
device. If you fail to take note of this information,
you may damage the device or the measured
results may be incorrect.
NOTE
Includes additional information about use of the
device.
English
Safety information • 69