Seca 285 Manual De Instrucciones Y Garantía página 96

Automatic switchover
of weighing range
Switch off scales
96 •
The scales are equipped with two weighing ranges.
Weighing range 1 (
indication with a reduced load-bearing capacity.
Weighing range 2 (
of the maximum load-bearing capacity of the scales.
When the scales are switched on, weighing range 1 is
activated. If a specific weight value is exceeded, the
scales automatically switch to weighing range 2.
To switch back to weighing range 1, proceed as
follows.
• Remove all loads on the scales.
Weighing range 1 is active again.
• Press the Start key
display.
) offers a more precise weight
) allows you to take advantage
of the multifunctional