Sony VPL-FX51 Manual De Instrucciones página 18

Selecting the Menu Language/Projecting
Selecting the Menu Language
You can select the language for displaying in the
menu and other on screen displays from 9 languages.
The factory setting is ENGLISH.
4,5,6 3
TEMP/FAN
LENS CONTROL
MENU
RESET
ENTER
1
1
Plug the AC power cord into the wall outlet.
2
Press the I / 1 key to turn on the power.
3
Press the MENU key.
The menu display appears.
4
Press the M or m key to select the SET SETTING
menu, then press the , or ENTER key.
The SET SETTING menu appears.
SET SETTING
STATUS: ON
INPUT-B TERM.: PC DIGITAL
INPUT-A: COMPUTER
AUTO INPUT SEL: OFF
LANGUAGE: ENGLISH
POWER SAVING: OFF
IR RECEIVER: FRONT&REAR
5
Press the M or m key to select LANGUAGE, then
press the , or ENTER key.
6
Press the M or m key to select a language, then
press the < or ENTER key.
The menu changes to the selected language .
To clear the menu display
Press the MENU key.
The menu display disappears automatically if no key
is pressed for one minute.
18
(GB)
2
LAMP/COVER
POWER SAVING ON/STANDBY
INPUT
APA
INPUT-A
Projecting
4~7
4~7
APA key
TEMP/FAN
LENS CONTROL
MENU
RESET
ENTER
COMMAND
OFF ON
PJ NETWORK
4~7
LENS
APA key
APA
MENU/
TAB
D ZOOM
1
FUNCTION
RM-PJM15
PROJECTOR
1
After all equipment is connected completely, plug
the AC power cord into the wall outlet.
The ON/STANDBY indicator lights in red and the
projector goes into the standby mode.
2
Press the I / 1 key to turn on the projector.
The ON/STANDBY indicator lights in green.
3
Turn on equipment connected to the projector.
Press the INPUT key to select the input source.
ON/STANDBY
3 2
indicator
LAMP/COVER
POWER SAVING ON/STANDBY
INPUT
APA
Rear remote
control detector
2
PIC
MUTING
3
AUDIO INPUT
D KEYSTONE
VOLUME
HELP
LASER
FREEZE
4~7
R
ENTER
CLICK
RESET/
ESCAPE
3
2