Descargar Imprimir esta página

Futurelight LCC-18 W/A Manual Del Usuario página 26

Publicidad

Idiomas disponibles

Idiomas disponibles

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The diffusor will require weekly cleaning as smoke-fluid tends to building up residues, reducing the light-
output very quickly. The cooling-fans should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Number of LEDs:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fuse:
Accessory:
FUTURELIGHT EX-8/32 controller
FUTURELIGHT CP-240 controller
FUTURELIGHT CP-256/64 controller 16bit
FUTURELIGHT CP-512/64 controller 16bit
Wizard-512 USB DMX-Software + Interface
Wizard-1024 USB DMX-Software + Interface
FUTURELIGHT DES-3 DMX-terminator 3-pin
Please note: Every information is subject to change without prior notice. 09.01.2007 ©
LCC-18 W/A
230 V, 50 Hz AC ~
80 W
2/5
3-pin XLR
18
190 x 220 x 275 mm
4.30 kg
45° C
:
a
(steady state):
60° C
B
0.1 m
0.1 m
F 2 A, 250 V
No. 51834047
No. 51834265
No. 51834288
No. 51834295
No. 51860102
No. 51860110
No. 51834001
26/50
LCC-36 W/A
230 V, 50 Hz AC ~
100 W
2/5
3-pin XLR
36
190 x 220 x 275 mm
4.30 kg
45° C
60° C
0.1 m
0.1 m
F 2 A, 250 V
No. 51834047
No. 51834265
No. 51834288
No. 51834295
No. 51860102
No. 51860110
No. 51834001
51841316_V_1_0.DOC

Publicidad

loading

Este manual también es adecuado para:

Lcc-36 w/a