Publicidad
Idiomas disponibles
Idiomas disponibles
English
11.2 Squeezing and locking the spray gun trigger
Pressing the spray gun trigger
► Move the retaining latch (1) to the
► Press and hold the trigger (2).
The high-pressure pump starts up automatically and water
flows out of the nozzle.
Locking the spray gun trigger
► Release the trigger (2).
The high-pressure pump switches off automatically and
water stops flowing out of the nozzle. The high-pressure
washer is still switched on.
► Move the retaining latch (1) to the
60
11.3 Cleaning
According to the application, the following nozzles can be
used:
– Fan-jet nozzle: The fan-jet nozzle is designed for cleaning
2
1
– Rotary nozzle: The rotary nozzle is designed for removing
The user can work close up to the surface in order to remove
stubborn dirt.
The user can work at a distance when cleaning any of the
following surfaces:
– Painted surfaces
– Wooden surfaces
position.
– Rubber surfaces
2
1
The fan-jet nozzle is adjustable.
Turning the fan-jet nozzle in the + direction increases the
working pressure.
Turning the fan-jet nozzle in the – direction reduces the
working pressure.
► Before starting work, direct the water jet at an
position.
► Select the distance between the nozzle and the surface to
11 Operating the pressure washer
large areas.
stubborn dirt.
inconspicuous area of the surface and check that the
surface does not suffer damage.
be cleaned so that the surface to be cleaned is not
damaged.
0458-001-9821-A
Publicidad
