• Do not use on a gravel surface or crushed rock
surfaces. Use extreme caution when crossing
gravel/crushed rock drives, walks, or roads.
• Clear snow from slopes by going up and down. Never
go across the slope. Use caution when changing
directions. Never clear snow from steep slopes.
• Never attempt to use the snow thrower on a roof or
any steep, inclined, slippery surfaces.
• Never operate snow thrower without proper guards,
plates or other safety protective devices in place.
• Never operate the snow thrower near glass
enclosures, automobiles, trucks, window wells,
dropoffs, etc. without proper adjustment of the snow
discharge angle. Keep children and pets away.
• Don't force or overload the snow thrower. The snow
thrower will perform at its best and safest when it is
run at the rate for which it was designed.
• Never operate the machine at high speeds on slippery
surfaces. Look behind and use care when backing up.
• Never direct discharge towards people or allow anyone
in front of the unit while operating.
• Wear safety glasses or goggles that are marked as
meeting ANSI Z87.1 standards, and ear/hearing
protection when operating this unit.
• Use the unit only in daylight or good artificial light.
• Avoid accidental starting. Remain in the starting
position whenever starting the unit. The operator and
unit must be in a stable position while starting. See
Starting/Stopping Instructions.
• Use the right tool. Only use this tool for the purpose
intended.
• Do not overreach. Always keep proper footing and
balance.
• Always hold the unit with both hands when operating.
Keep a firm grip on handles or grips.
• Keep hands, face, and feet at a distance from all
moving parts. Do not touch or try to stop the rotor
when it is rotating.
• If the rotor will not rotate freely due to frozen ice, thaw
the unit thoroughly before attempting to operate it
under power.
• Keep the rotor clear of debris.
• Never attempt to clear the rotor with the motor
running. Turn the motor off first and unplug the
extension cord.
• Keep clothing and body parts away from the rotor.
• Do not operate the motor faster than the speed
needed. Do not run the motor at high speed when not
RULES FOR SAFE OPERATION
clearing snow.
• Always stop the motor when clearing snow is delayed
or when walking from one location to another.
• Disengage power to the rotor when snow thrower is
transported or not in use.
• After striking a foreign object, turn the unit off and
inspect the snow thrower for damage. Unplug the
unit. Repair damage before restarting and operating
the unit.
• If the unit should start to vibrate abnormally, stop the
unit and check immediately for the cause. Vibration is
generally a warning of trouble.
• Stop the motor and unplug the unit whenever you
leave the operating position, before unclogging the
rotor or discharge vanes, and when making any
repairs, adjustments, or inspections.
• Never discharge snow onto public roads or near
moving traffic.
• Let the snow thrower run for a few minutes after
clearing snow so moving parts do not freeze.
• Use only original equipment manufacturer
replacement parts and accessories for this unit. These
are available from your authorized service dealer. Use
of any unauthorized parts or accessories could lead to
serious injury to the user or damage to the unit, and
void your warranty.
• Do not use the unit in the hand held position. Do not
pick up the unit when it is powered and running. The
unit is designed to travel along the ground.
OTHER SAFETY WARNINGS
• Be sure to secure the unit while transporting.
• Store the unit in a dry area, locked up or up high to
prevent unauthorized use or damage, out of the reach
of children.
• Never douse or squirt the unit with water or any other
liquid. Keep handles dry, clean and free from debris.
Clean after each use, see Cleaning and Storage
instructions.
• If the labels on the unit become defaced or start lifting
off, contact your authorized service dealer.
• Keep these instructions. Refer to them often and use
them to instruct other users. If you loan someone this
unit, also loan them these instructions.
• Maintain snow throwers with care. Follow instructions
for lubricating and changing accessories.
SAVE THESE INSTRUCTIONS
5