GE UVC9420 Manual Del Propietario E Instalación página 17

STEP 3 INSTALL HOOD CANOPY
TO THE CABINET
1. Confirm the damper is in place in the hood
exhaust opening, see previous page for
instructions.
2. Tuck the house wiring out of the way.
3. Push the hood canopy straight up through the
cutout opening until the temporary locking clips
engage. The locking clips are designed to hold
the insert sleeve in place until it is secured with
screws.
4. Once the hood canopy is in place, seal the duct
to the damper with duct tape. (DO NOT USE
SCREWS).
49-2000930 Rev. 1
Installation - UVC 9420
2x4 Stud
17