USING YOUR MEDIA PLAYER
1) Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN JACK
on the left of the console and the headphone jack on your media player.
2) Use your media player buttons to adjust song settings.
3) Remove the AUDIO ADAPTOR CABLE when not in use.
ENERGY SAVER (STANDBY MODE)
This machine has a special feature called Energy Saver™ mode. This mode is NOT automatically activated.
When Energy Saver mode is activated, the display will automatically enter standby mode (Energy Saver mode) after
15 minutes of inactivity. This feature saves energy by disabling most power to the machine until a key is pressed on the
console. This feature can be turned on or off in the engineering menu.
To enter the engineering menu, press and hold the
keys to navigate through the menu to ENG 3. Press ENTER to select. Press ENTER to navigate to P5 in the ENG3
menu. Use the
and hold STOP again for 3-5 seconds to exit the engineering menu.
22
22
keys to select ENRGY SVE ON or OFF. Press and hold STOP for 3-5 seconds to exit ENG 3. Press
INCLINE key and
SPEED key for 3-5 seconds. Use the