Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Your tool has been designed to operate over a long period of time with a minimum of
maintenance.
Continuous satisfactory operation depends upon proper tool care and regular cleaning.
• Clear the cooling vents and slots with a clean, dry paint brush.
• Clean the housing with a clean, damp cloth. Do not use solvents.
Accessories
Recommended accessories for use with your tool are available at extra cost from
your local dealer or authorized service center. If you need assistance in locating any
accessory for your tool, please call 1-800-544-6986.
wARNING: The use of any accessory not recommended for use with this tool could be
hazardous.
Problem
• Unit will not start.
• Circuit fuse is blown.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
Service Information
All Black & Decker Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the Black & Decker location
nearest you. To find your local service location, refer to the yellow page directory under
"Tools—Electric" or call: 1-800-544-6986 or visit www.blackanddecker.com
TROuBLEShOOTING
Possible Cause
• Cord not plugged in.
• Replace circuit fuse.
• Circuit breaker is tripped.
• Cord or switch is damaged.
11
Possible Solution
• Plug tool into a working
outlet.
(If the product repeatedly
causes the circuit fuse to
blow, discontinue use
immediately and have it
serviced at a Black &
Decker service center or
authorized servicer.)
• Reset circuit breaker.
(If the product repeatedly
causes the circuit
breaker to trip,
discontinue use
immediately and have it
serviced at a Black &
Decker service center or
authorized servicer.)
• Have cord or switch
replaced at Black
& Decker Service
Center or Authorized
Servicer
Publicidad
