Descargar Imprimir esta página

PEERLESS SAL730P Instalación Y Montaje página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation to Side of Cabinet
If you are mounting your screen to a wall, skip to page 6 for wood stud walls and page 7 for concrete walls.
WARNING
• Make sure that the cabinet unit and cabinet side wall
will safely support the combined load of the
equipment and all attached hardware and
components.
Note: Screen is not attached to mount at this point. It is shown only as a reference for visualization purposes.
1
Place your screen on side wall of cabinet in a location that will allow enough clearance between the screen and the
back wall when the mount is folded up as shown in figure 1.1. Mark the center of screen on the cabinet. Mark a
vertical line 1-1/2" (38 mm) toward the wall which represents the center of wall plate. Dimension "D1" represents the
minimum distance between the wall plate and the screen for this clearance.
Go to next page for installing the mount to the cabinet.
To swivel screen around the cabinet, read below.
If you would like the screen to swivel around the cabinet, place your wall arm in a location that will allow enough
clearance between the wall arm and the cabinet door as shown in figure 1.2. The dimension 11-7/8" (302 mm)
represents the maximum distance the center of the wall plate needs to be from the cabinet door. Mark a vertical line
on the cabinet where the wall arm assembly will be placed as shown in figure 1.2.
Notes:
• Before swiveling the wall arm around cabinet, ensure the cords have enough slack to allow full articulation of wall
arm (A).
• To allow swiveling around the cabinet and folding up the mount, the minimum distance from cabinet door must be
at least equal to dimension "D1".
Go to next page for installing the mount to the cabinet.
CS = center of screen
CP = center of wall plate
CABINET
DOOR
1-1/2"
(38 mm)
SCREEN
Side View of Cabinet
(wall arm folded up against cabinet)
All manuals and user guides at all-guides.com
WALL
CS CP
"D1"
A
fig. 1.1
4 of 30
CAUTION
• Before installing your mount, empty cabinet and note
location of shelves to avoid drilling into the shelves.
CABINET
DOOR
max. distance from
cabinet door is
SCREEN
11-7/8"
(302 mm)
A
Side View of Cabinet
(wall arm swiveled around cabinet)
ISSUED: 06-10-05 SHEET #: 095-9223-8 09-07-06
WALL
WALL PLATE
fig. 1.2

Publicidad

loading

Este manual también es adecuado para:

Sal730p-sRtlal-100Rtlal-100sD-lal-100D-lal-100s105457