Descargar Imprimir esta página

Beurer IL 30 Instrucciones Para El Uso página 5

Ocultar thumbs Ver también para IL 30:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
control elements
Sliding switch
Continuous setting ( )
Off (0)
Length of radiation /min. (maximum 12 minutes)
cleaning/changing the infrared lamp
Before every cleaning and when exchanging the infrared lamp, the appliance must be switched off, dis-
connected from the mains and must be cool.
The appliance can be cleaned with a damp cloth. Do not use any cleaning agents containing solvents
on the appliance. Ensure that no water penetrates the appliance. Use the appliance again only when it is
completely dry. Please note that only infrared lamps of the original type may be used as replacements.
Appliance: Replacement infrared lamp (type): specifications:
IL 30
Infrared PAR 38 E (150 W)
!
Important information –
Please retain for later use
Please read the information carefully and keep it accessible for other users.
• The lamp housing and the infrared lamp become very hot during operation. There is a risk of burning if
these are touched. Always let the lamp cool down first before touching it.
• Remove all packaging material before the appliance is used.
• The appliance may only be connected to the mains voltage mentioned on the type plate.
• While using the lamp on the face, always keep the eyes closed in order to avoid injury to the eyes (do
not look directly at the infrared light).
• This device is not intended for use by persons (including children) with restricted physical, sensory or
mental capabilities and/or by persons lacking the required understanding of the equipment and how
it is used, unless they are supervised by a person who is responsible for their safety or they are given
instructions on how to use the device.
Children should be supervised to ensure that they do not use the device as a toy.
• Do not use it on persons sensitive to heat.
The sensitivity to heat can be reduced or increased in the following cases:
– diabetic patients
– persons with sleepiness, dementia or difficulties concentrating
– persons with illness-related skin changes or persons with scarred skin areas in the application area
– persons with allergies
– children and older persons
– after consuming medications or alcohol
• In case of acutely inflammatory processes, radiation should only be carried out after consulting a doctor.
• Always limit the period of use and check the reaction of the skin.
• Medications, cosmetics or food can lead to a over-sensitive or allergic reaction of the skin under cer-
tain conditions. Radiation must be ended immediately in this case.
• If the appliance is operated continuously, caution and attention are advisable - never fall asleep during
radiation!
• Prolonged use can cause burns to the skin.
• Do not touch the infrared lamp or unscrew it when it is connected to the mains.
• Children do not understand the risks associated with electrical appliances. Make sure the appliance
inot used by children without appropriate supervision.
3
2
0
2
1
Explanation of symbols:
230V ~ 50 Hz
5
4
4
6
8
10
12
Note - read operating
instructions.
Application part Type B
Protection class II unit

Publicidad

loading