Publicidad
Idiomas disponibles
Idiomas disponibles
Deleting network settings
If there is a problem when trying to establish a
connection, or if you would like to register the appliance
in a different home WLAN network (Wi-Fi), the Home
Connect settings can be reset.
1.
Open the Home network menu on your refrigerator.
2.
Press C button to move to the menu item Delete
network settings.
3.
Press % button to open the menu item.
4.
Confirm the prompt to delete the network settings.
To then reconnect the appliance to the home WLAN
network (Wi-Fi), perform initial setup again.
~ "Setting up the connection to the home
network" on page 17
Information on data protection
The first time your Home Connect appliance is registered
on a WLAN home network connected to the Internet (Wi-
Fi), your appliance will transmit the following types of
data to the Home Connect server (initial registration):
Unique appliance identification (consisting of
▯
appliance codes as well as the MAC address of the
installed Wi-Fi communication module).
Security certificate of the Wi-Fi communication
▯
module (to ensure a secure data connection).
The current software and hardware version of your
▯
domestic appliance.
Status of any previous resetting to factory settings.
▯
This initial registration prepares the
Home Connect functions for use and is only required
when you want to use these Home Connect functions for
the first time.
Note: Please note that the Home Connect functions can
be utilized only in conjunction with the Home Connect
app. Information on data protection can be called up in
the Home Connect app.
en-us
Home Connect
19
Publicidad
