Cleaning
D
9
CAUTION
C l e a n i n g
Avoid damaging the appliance and the
equipment.
Do not use abrasive, chloride-based or acidic
▯
cleaning agents or solvents.
Do not use scouring or abrasive sponges.
▯
The metallic surfaces may corrode.
Never clean the shelves or bins in the
▯
dishwasher.
The parts may become deformed.
Cleaning the display
The change in temperature and humidity can cause the
controls to steam up.
Switch the clean lock on before cleaning.
~ "Display lock for cleaning" on page 13
Use a clean micro-fiber cloth for cleaning.
Cleaning the appliance interior
Proceed as follows:
1.
Press main On/Off switch.
2.
Take out bottles and store in a cool location if
possible.
3.
Clean the appliance with a soft cloth, lukewarm water
and a little pH-neutral washing-up liquid.
9
CAUTION
The rinsing water must not run into the light or
through the drainage hole into the evaporation
area.
4.
Wipe door seal with clear water and dry thoroughly
with a cloth.
5.
Switch appliance back on and put in bottles.
Cleaning the equipment
To clean, take the removable parts out of the appliance.
~ "Equipment" on page 11
Care instructions for stainless steel
surfaces
When taking care of and cleaning stainless steel
surfaces, use only cleaning agents suitable for stainless
steel and a stainless steel cleaning cloth.
You can purchase a suitable stainless steel cleaning
cloth from customer service.
To prevent visible scratches, clean the stainless steel
surface in the direction of the structure.
en-us
Cleaning
23