Publicidad
Idiomas disponibles
Idiomas disponibles
9 – Display and Confi guration
9-11 Local Setup Menu
•
Enter the UPS system setup menu as described in
1
the scroll buttons ( , ) to move the cursor to "LOCAL SETUP",
then press the enter button (
•
Use the scroll buttons (
2
one of the menu choices.
•
From the "DATE/TIME CHANGE" screen, use the scroll buttons
3
( , ) to select the desired settings and press the enter button
(
) to confirm the settings. Note: Changing this setting does not
require an administrator login – a user login is sufficient.
•
4
From the "PASSWORD CHANGE" screen, use the scroll buttons
( , ) and the enter button (
choice. Use the scroll buttons ( , ) to select the desired settings
and press the enter button (
The administrator password should be used by qualified service
personnel only.
•
From the "PARALLEL ID" screen, use the scroll buttons (
5
to select the desired settings and press the enter button (
to confirm the settings. Note: If two UPS systems are used in a
parallel redundancy configuration, the parallel ID numbers of the
UPS systems must be 1 and 2.
200803004 93-2793 SU80k manual 4C.indd E35
200803004 93-2793 SU80k manual 4C.indd E35
(continued)
Section
9-7. Use
).
, ) and the enter button (
) to select
) to select the desired menu
) to confirm the settings. Note:
)
1
2
3
4
4b
, )
5
35
1
2
3
4
5
6
7
8
9
10
11
12
13
6/16/2008 1:43:58 PM
6/16/2008 1:43:58 PM
Publicidad
