Setting The Temperature; Adjusting The Air Nozzles; Setting The Timer - Dometic FreshJet 1100 Instrucciones De Uso

Operating the roof air conditioner
9.7

Setting the temperature

Cooling Mode
In the "Automatic" (
can specify a temperature between 16 °C and 31 °C via the remote control.
➤ Use the + or – button to select the desired temperature.
✓ The roof air conditioner confirms the receipt of the values with a high note.
✓ The temperature is set on the roof air conditioner.
Heating Mode (available for models with heating only)
In the "Automatic" (
ature between 16 °C and 31 °C via the remote control.
➤ Use the + or – button to select the desired temperature.
✓ The roof air conditioner confirms the receipt of the values with a high note.
✓ The temperature is set on the roof air conditioner.
9.8

Adjusting the air nozzles

The air supply within the vehicle can be regulated by setting the air nozzles
(fig. 5, page 6).
➤ Chillout ADB: Turn the slats (1) in the air nozzles in the required direction
using the thumb wheel (2).
➤ Design ADB: Turn the slats (1) in the air nozzles in the required direction.
9.9

Setting the timer

The timer function allows you to set a specific time period for air conditioning.
You can specify the switch-on time, the switch-off time or both values. The
time can be set in 10 minute increments.
I
NOTE
The remote control returns to its initial mode if no button is
pressed on the remote control for 15 seconds while programming
the timer.
➤ Before programming the timer, select the air conditioning mode and all
required values (e.g. temperature).
34
), "Cooling" ( ), and "Dehumidifying" ( ) modes, you
) and "Heating" (
Dometic FreshJet
) modes, you can specify a temper-
EN