Setting The Temperature; Setting The Timer - Dometic FreshWell 200 Instrucciones De Uso

Operating the under-bench air conditioner
7.7

Setting the temperature

I
NOTE
The under-bench air conditioner must be switched on.
In the "Cooling" (
you can specify a temperature between 18 °C and 30 °C via the remote
control.
➤ Use the + or – button to select the desired temperature.
✓ The under-bench air conditioner confirms the receipt of the values with a
high note.
✓ The temperature is set on the under-bench air conditioner.
7.8

Setting the timer

The timer function allows you to set a specific time period for air conditioning.
You can specify the switch-on time or the switch-off time values.
I
NOTE
The remote control returns to its initial mode if no button is
pressed on the remote control for 15 seconds while programming
the timer.
Setting the switch-on time
I
NOTE
The under-bench air conditioner must be switched off.
➤ Press the TIMER button once.
✓ The clock symbol (
➤ Use the + or – button to set the time when the under-bench air conditioner
is to switch on.
➤ Press the TIMER button to transmit the value to the under-bench air
conditioner.
✓ The clock symbol (
constantly.
✓ The yellow LED lights up.
42
), "Dehumidifying" ( ), and "Circulating air"(
) on the display of the remote control flashes.
) on the display of the remote control lights
Dometic FreshWell 2000
) modes,
EN