Cleaning the roof air conditioner
9.14
Setting the time
The remote control needs the current time in order to program the timer. The
time is indicated on the display of the remote control.
Perform the following steps to set the time:
I
NOTE
The remote control returns to its initial mode if no key is pressed
on the remote control for ten seconds while setting the time.
➤ Press and hold the CLOCK button to go to the mode used to set the time.
✓ The time flashes on the display of the remote control.
➤ Use the + or – button to set the current time.
➤ Press the SET – °F/°C button to confirm the time.
10
Cleaning the roof air conditioner
A
NOTICE! Beware of damage
z Do not clean the roof air conditioner with a high-pressure
cleaner. Exposure to water can damage the air conditioner.
z Do not use sharp or hard objects or cleaning agents for clean-
ing as these may damage the roof air conditioner.
z To clean the roof air conditioner, use water with a gentle clean-
ing agent. Never use petrol, diesel or solvents.
➤ Clean the housing of the roof air conditioner and the air outlet unit occa-
sionally with a damp cloth.
➤ Regularly remove leaves and other dirt from the ventilation grilles
(fig. 6 1, page 7) of the roof air conditioner. Make sure you do not
damage the grilles in the process.
➤ Clean the remote control with a slightly damp cloth from time to time. We
recommend using a cleaning cloth for glasses to clean the display.
38
Dometic FreshJet
EN