Publicidad
ENGLISH
PVXp
10
™
Thank you for purchasing the powered Peavey
PVXp
10 . The PVXp 10 features an ultra-reliable bi-amped power section that
®
™
provides a total of 400 Watts of peak available power with DDT
compression. Featuring a 10" heavy-duty woofer with a 2 3/8"
™
voice coil and 50 ounce magnet, and the RX
10N compression driver, with 1" diaphragm on a 100 degree horizontal x 60 degree
™
vertical pattern asymmetrical horn. The PVXp 10 provides a balanced input via a combination jack that accepts balanced
TRS 1/4" input as well as a balanced XLR input. There are two balanced Thru outputs, a Male XLR and 1/4" TRS. There is an
adjustable Level control as well as a combination LED indicator that lights when power is on and when the "soft-limiting" DDT
circuit is activated, and a Contour switch for boosting lows and highs.
Features
• Two-way bi-amped sound reinforcement enclosure
• Total of 400W peak available power
• 10" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet
• RX 10N compression driver, with 1" diaphragm
• Ultra-reliable fan-cooled power amps with DDT
• Constant directivity horn with 100 by 60 degree coverage
• Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads
• Input is via a combo female XLR and 1/4" TRS phone jack with balanced input
• Thru output is via an XLR and 1/4" TRS phone jack
• Contour switch for boosting lows and highs.
• Durable plastic injection-molded trapezoidal enclosure
• Extra angled section on right side allows floor monitor use
• Full-coverage heavy-duty perforated steel grilles, with powder coat finish
• Pole mount molded-in for 1 3/8" diameter poles
• Top and bottom flying point inserts
DESCRIPTION
The PVXp 10 is a two-way sound reinforcement system based on a heavy-duty Pro 10 10" woofer and a RX 10N dynamic
compression driver mounted on a 100 by 60 degree coverage constant directivity horn It's sleek modern appearance coupled
with excellent performance offer an outstanding package.
The lightweight yet rugged injection-molded plastic enclosure with molded-in stand mount cup facilitates portable use for live
music or PA sound. The trapezoidal cabinet has two handles for ease of portability, and an extra 45-degree angled section on
the right side to allow use as a floor monitor. Four sets of flying/mounting points, two on the top, and two on the bottom, with
a total of 12 cabinet inserts, provide for the ultimate in installation flexibility. A black powder coated perforated steel grille
provides driver protection and a professional appearance.
The heavy-duty 10" woofer provides a good strong low end for such a compact enclosure. The RX 10N compression driver
tweeter is coupled to a constant directivity horn with smooth, even response, low distortion and good high frequency
dispersion. This horn has an asymmetrical vertical polar response, aiming the main energy lobe down 10 degrees, so it is aimed
at the audience, instead of over their heads. The vertical polar pattern is +20 degrees, -40 degrees. This helps reduce ceiling
reflections for greater clarity and gain before feedback.
The PVXp 10 speaker system power amplifiers providing the bi-amplification are low-distortion ultra-reliable fan-cooled.
The power supply for both amps is a switch mode type for low weight and high efficiency. Both amplifiers feature our DDT
compression, which virtually eliminates audible power amplifier clipping. Cooling is provided by a low-noise fan, for reliable
operation under any conditions.
Publicidad
