EMU01129*
PROCEDURE FOR TILTING DOWN
Hydro-tilt model
1) Release the tilt-lock lever.
402076
2) Hold the rear of the top cowling with
one hand, tilt the engine up slightly
and pull out the tilt support knob.
3) Slowly tilt the engine down.
4) Place the tilt-lock lever back into the
lock position.
403063
EMU00305
PROCEDURE FOR TILTING DOWN
Power trim/tilt model
1) Push the power trim/tilt switch "UP"
until the engine is supported by the
tilt rod.
2) Pull out the tilt support knob.
3) Push the power trim/tilt switch "DN"
(Down) to lower the engine to the
411042
desired position.
3-24
GB