Sony VPL-FX200U Manual De Instrucciones página 6

Features
High brightness, high picture quality
Accepts various input signals
System expandability and versatility
Easy and flexible setup
..........................................................................................................................................................................................................
1) VGA, SVGA, XGA, SXGA and UXGA are the registered
trademarks of the International Business Machines
Corporation, U.S.A.
6
(GB)
• High brightness
Adopting four 120 W UHP lamps and newly developed optical system
povides high brightness (light output 3,100 of ANSI lumen) and excellent
uniformity on the picture.
• High resolution
Thanks to use of three 1.8-inch XGA
pixels, the projector can project the sharp picture with the resolution of
1024 × 768 pixels.
• DRC (Digital Reality Creation)
The DRC technology allows you to obtain a finer, more detailed picture
with four-times higher density than the conventional video picture.
This projector has a built-in high performance scan converter which
converts the input signals to display the 15 k RGB, HDTV, VGA
1) 1) 1)
SVGA , XGA , SXGA
video signals of the composite, S video and component.
The projector has RS-232C/422A/PJ COM interface connectors for
communication.
By combining the interface boards and signal interface switcher (not
supplied), VPL-FX200U/FX200E/FX200M projection systems can be
greatly expanded. This projector also has the group and device index
functions for using multiple projectors in one system.
• Sony's original APA (Auto Pixel Alignment) function
You can obtain the clearest picture automatically by simply pressing the
APA key when the signal is input from a computer.
• Easy setup with external equipment
This projector has 39 preset data for input signals in the memory. You can
get a picture properly on the screen by connecting equipment and pressing
the APA key.
1)
panels with approximately 790,000
1)
and UXGA (fV = 60 Hz) signals as well as the
1) ,