Gaggenau RB 472 Instrucciones De Uso página 11

Switching off
Press setup button μ.
All of the changed settings are stored.
Note:
If no button is selected within 20 seconds, the setup
mode ends automatically. All of the changed settings
are stored. The set temperature is displayed again
in the display panel.
Menus in the setup mode
The following settings can be made.
Menu
Temperature unit
Language
Sound
Energy saving mode
(eco function)
Door rail heater (DRY
DOOR)
Vacation mode
If leaving the appliance for a long period of time, you
can switch the appliance over to the energy-saving
vacation mode.
When Vacation mode is switched on, the following
settings are made:
▯
The appliance works in energy saving mode.
▯
The illumination is switched off.
▯
Fast cooling or fast freezing is then ended
(if activated).
Switching on
Press Holiday button ¶.
VACATION is displayed in the display panel.
Switching off
Press Holiday button ¶.
The previous settings and temperature values are
once again activated.
Possible setting
°C (degrees Celsius)
°F (degrees Fahrenheit)
English
French
Spanish
On
Off
On
Off
On
Off
Rest mode
When Rest mode is switched on, the following
settings are switched off:
▯
Ice maker
▯
Acoustic signal
▯
Interior light
▯
Messages on the display panel
▯
The background illumination of the display panel
is reduced
▯
Buttons are locked
Switching on
Press the fast cooling button ´ and keep it held
1.
down.
Press Holiday button ¶.
2.
Hold the fast cooling button ´ down for
3.
3 seconds longer.
The VACATION symbol flashes on the display
panel and RESTMODE is displayed.
Switching off
Press Holiday button ¶.
The previous settings and temperature values are
once again activated.
Energy saving mode
If the energy saving function (eco function) is
activated, the appliance switches to energy saving
operation. This energy saving function is preset
at the factory in order to reduce energy consumption.
The background illumination of the fascia is likewise
reduced.
Switching on
Press setup button μ.
1.
Press the selection button ¿, until ECO MODE
2.
and the current setting (OFF) is displayed.
Press the setting button @, in order to change
3.
the setting.
Press the setup button μ, in order to store
4.
the setting.
ECO is displayed in the display panel.
11