Rest mode
When Rest mode is active
–
the Fast freezing function ends (if switched on),
–
the ice maker switches off,
–
the acknowledge signal is deactivated when the button
is pressed (if switched on),
–
the interior light switches off,
–
the background light of the display is reduced.
To switch on Rest mode:
Press and hold down the FAST FREEZING button
Press the VACATION button
Hold down the FAST FREEZING button
3 seconds. The
VACATION
display.
The background light on the display is reduced.
is displayed.
SABBATH
To end Rest mode, press the VACATION button
The previous settings and temperature values are used
again.
3
$
.
3
for a further
symbol flashes on the
$
.
Freezing and storing
Store the frozen produce
m
Do not refreeze frozen food which is thawing or which has
thawed. Boil or fry the food before refreezing it. No longer
store the frozen produce for the max. storage period.
When purchasing deep-frozen food, comply with
the following:
–
Check whether the packaging is damaged.
–
Check the sell-by date.
–
The temperature of the supermarket freezer must
be lower than 0 °F (–18 °C). If not, the storage life
of the food is reduced.
–
Purchase deep-frozen food last. Wrap in newspaper
or place in a cold bag and take home.
–
At home immediately place deep-frozen food
in the freezer compartment. Use the deep-frozen
food before the sell-by date runs out.
Freezing food yourself
Freeze fresh, undamaged food only. To prevent food from
losing its flavour or drying out, place in airtight containers.
Food should be frozen solid as quickly as possible.
.
How to wrap food correctly
Place the food in the wrapping.
Press out all the air.
Seal the wrapping.
Label the wrapping with the contents and date.
The following products are not suitable for wrapping food:
Wrapping paper, greaseproof paper, cellophane, refuse
bags and used shopping bags.
The following products are suitable for wrapping food:
Plastic film, polyethylene blown film, aluminium foil and
freezer tins. These products can be purchased from your
dealer.
Bags and polyethylene blown film can be sealed
with a film sealer.
CAUTION
NOTE
m
17