Adjustment Options; Adjusting The Call Volume - Alcad VIDEOPORTERO 2 HILOS Manual De Usuario

ENG-24

ADJUSTMENT OPTIONS

ADJUSTING THE CALL VOLUME

You can adjust the volume of the call tone on the monitor itself. To do so, move the control (2)
on the monitor. There are three positions: high ( ), low ( ) and mute ( ).
In the mute position, the status indicator LED (5) acts as a reminder by becoming red.
HOW TO OPEN THE SETTINGS MENU
While no call is being made and with the monitor on standby, press auxiliary button P2
The monitor will switch on and will show the Settings menu.
1
2
OK OK
2
When 60 seconds have expired or if a call is made from the entrance panel to another
dwelling, the monitor will switch off, reverting to standby status. It is still possible, however,
to continue viewing the saved images. For details, consult your installer. If, while you are
consulting the saved images of unanswered calls, you receive a new call, the monitor will emit
a warning sound. The screen will then display the image of the person making the call. You
can reply to this call as described in the section "Receiving a call. Monitor active" on page 16.
After remaining inactive for a period of 15 seconds, the monitor reverts to being on standby.
2-WIRE VIDEODOOR ENTRY SYSTEM MONITOR
2
1. Settings menu controls.
2. Settings menu options
3. Exit Settings menu button.
UP
1
1
DOWN
2
OK
OK
High
Low
Silence
MENU
DISPLAY
LANGUAGE
DATE/TIME
DEFAULT MODE
EXIT
.
2
3