AERMEC EWP 181 H Manual De Instrucciones página 27

ADJUSTING THE AIR FLOW DIRECTION
VERTICAL AIR FLOW DIRECTION
HORIZONTAL AIR FLOW DIRECTION
CAUTION
Never attempt to adjust the vertical adjustment louvres manually.
• Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction
when the remote control is used for adjustment.
• When the vertical adjustment louvre is positioned at the lowest position in the COOL or
DRY mode for an extended period of time, condensation may result.
Do not adjust the horizontal adjustment louvre to the extreme left or right in the COOL mode
with the fan speed set to "SOFT(
Condensation may form on the louvres.
1
Press the SWING button on the remote con-
trol once.
• The vertical adjustment louvre will change
its angle continuously.
2
Press the SWING button again when the
vertical adjustment louvre is at the desired
position.
1
• The louvre will stop moving within the range
shown in the diagram.
2
• The adjusted position will be memorized
and will be automatically set to the same
position when operated the next time.
Adjustment range
COOL and DRY modes
The adjustment range
is narrower the SWING
range in order to pre-
vent condensation from
dripping.
Hold the horizontal adjustment louvre as
shown in the diagram and adjust the air flow
direction.
)" for an extended period of time.
E-9
HEAT mode
The range is wide
and air flow can be
directed toward the
floor.