SPARKY HD PROFESSIONAL BP 330E Instrucciones De Uso Originales página 5

II - Technical specifications
Model
▪ Power input
▪ No load speed
▪ Electronic speed pre-selection
▪ Constant electronics
▪ Reversing
▪ Protective clutch
▪ No load impact rate
▪ Impact energy
▪ Optimum capacity in concrete with twist drill bits
▪ Capacity in concrete
twist drill bits
core cutters
▪ Capacity in steel with adapter and chuck 176838 (not included)
▪ Capacity in wood with adapter and chuck 176838 (not included)
▪ Chisel positions
▪ Tool holder
▪ Weight (EPTA Procedure 01/2003)
▪ Protection class (EN 60745-1)
NOISE AND VIBRATION INfORMATION
Measured values determined according to EN 60745.
▪ Noise emission
A-weighted sound pressure level L
Uncertainty К
pA
A-weighted sound power level L
Uncertainty К
wA
Wear hearing protection!
▪ Vibration emission *
Total vibration values (vector sum in the three axes) determined according to EN 60745:
Hammer drilling
Vibration emission value a
Uncertainty К
HD
Chiselling
Vibration emission value a
Uncertainty K
CHeq
* The vibration emission values are determined according to 6.2.7 EN 60745-1.
The vibration emission level given in this information sheet has been measured in accordance with
a standardised test given in EN 60745 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool
is used for different applications, with different accessories or poorly maintained, the vibration emis-
sion may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Maintain the power tool and the accessories and keep your hands warm during operation to reduce
the harmful effect of vibrations.
Dust from material such as paint containing lead, some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may cause allergic reactions and/or respiratory dis-
eases to the operator or bystanders.
Original instructions
pA
wA
h,HD
h,CHeq
BP 330E
900 W
380-830 min
-1
Yes
No
No
Yes
1560-3400 min
-1
1.5-5 J
24 mm
30 mm
80 mm
13 mm
30 mm
12
SDS-Plus
3.7 kg
II
90 dB (A)
3 dB (A)
101 dB (A)
3 dB (A)
2
11 m/s
2 m/s
2
7 m/s
2
2
1.5 m/s
3
EN