Publicidad
Idiomas disponibles
Idiomas disponibles
3. After connecting the hose to the water taps,
open them to remove foreign substances (dirt,
sand or sawdust) from the water pipes. Let
water flow out in a bucket and check its
temperature.
5. Check for leaks by opening the taps. If water leaks, check steps 1 to 4 again.
4. Firmly connect the hoses to the water
inlet by hand and then tighten another 2/3
turns with pliers.
Water inlet
WARNING
Do not over-tighten hoses. Doing so may
•
damage the valves and lead to leaks and
damage to property.
8
V.2
Publicidad
