Publicidad
Idiomas disponibles
Idiomas disponibles
This washer is designed for household use, it should not be installed on ships, trucks or
•
aeroplanes.
• If it is not to be used for a long period of time, the water supply tap should be turned off (e.g.
during holidays).
• Remove the plug and cancel the door locking function to prevent children from being locked
inside.
Packaging materials (e.g. plastics, corks) can be a danger to children and can cause
•
suffocation. Caution: ALL PACKAGING MATERIALS MUST BE KEPT OUT OF REACH OF
CHILDREN.
Installation of the water outlet pipe
• The water outlet pipe must be fixed with a cord so that it is high.
• To avoid damage by lightning or earth leakage, the water outlet pipe must be installed
correctly.
• To avoid siphoning, the height of the water outlet pipe should be 0.85 m - 1.25 m, and the end
of the water outlet pipe should not be inserted into water.
• If the water outlet pipe is too long, it should not be forced into the machine, as it may cause
abnormal noise. (Check the diagram on the next page).
Horizontal adjustment
• To avoid noise and vibrations, the washing machine should be
levelled. Preferably, it should be installed in a corner of the
room.
• If the floor is not level, the feet must be adjusted (never use
wooden blocks or similar). Make sure that all four feet touch
the floor firmly and that the machine is completely level.
Pipe installation instructions
9
sink
tube
clamp
cable
clamp
V.2
Publicidad
