Publicidad
Idiomas disponibles
Idiomas disponibles
Wool Programme (Lana/Lã)
This function is used for wool and fibre laundry. Please check the corresponding
icon on the laundry before washing it.
1. Preparation for washing
Open the door, insert the laundry and close it again.
•
Pull out the detergent drawer, add detergent and close it.
•
Connect the water inlet hoses and check that the tap is open.
•
2. Press the on/off button, switch on the power supply.
3.
Turn the programme knob and select "Lana/Lã".
Select the appropriate temperature and drum speed as required.
•
4. Press the start/pause button and start washing.
5. When the whole process is finished, a sound is emitted.
The wash load must be less than 2 kg.
•
When all the programmes are finished, remove all the laundry immediately to
•
avoid deformation.
Washing cannot be programmed.
•
To avoid damage to the laundry, the water temperature must be lower than 40°C.
•
White or light coloured items should be separated from dark coloured items.
•
To avoid damaging the laundry, use special detergent for woollen clothes.
•
Super Eco 40-60 programme
Washing the laundry when it is still lightly soiled can save time and energy.
1. Preparations for washing
Open the door, insert the laundry and close it again.
•
Pull out the detergent drawer, add detergent and close it.
•
Connect the water inlet hoses and check that the tap is open.
•
2. Press the on/off button to start the washing machine.
3.
Turn the programme knob and select "Super Eco 40-60".
Select the appropriate temperature and drum speed as required.
•
4. Press the start/pause button and start washing.
5. When the whole process is finished, a sound is emitted.
When the machine is running, if you want to change the setting, press the start/
•
pause key to stop the operation temporarily and then select the desired
programme.
14
V.2
Publicidad
