GreenWorks G24LT30 Manual Del Operario página 7

EN
1 GENERAL POWER TOOL
SAFETY WARNINGS
Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to
follow all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
2 TECHNICAL DATA
Voltage
No load speed
Cutting head
Cutting line diameter
Cutting path diameter
Weight (without bat-
tery pack)
Measured sound pres-
sure level
Guaranteed sound
power level
Vibration
Battery model
Charger model
Noise value.
3 DESCRIPTION
3.1 PURPOSE
This machine is used to cut grass, light weeds, and other
similar vegetation at or around ground level. The cutting
plane must be approximately parallel to the ground surface.
You should not use the machine to cut or chop hedges,
shrubs, bushes, flowers and compost.
3.2 OVERVIEW
Figure 1 - 22.
Lock-out button
1
Trigger
2
WARNING
24 V
8500±10% RPM
Automatic feed
1.65 mm
305 mm
2.35 kg
L =92 dB(A), K = 3 dB(A)
PA PA
L = 96 dB(A)
WA.d
2 2
3.7 m/s , k=1.5 m/s
G24B2 and other BAG series
G24UC2 and other CAG series
English
Auxiliary handle
3
Upper shaft
4
Cam lock
5
Lower shaft
6
Cut-off blade
7
Edge guide
8
Trimmer head
9
Edger wheel
10
Guard
11
Slot
12
Screw hole
13
Screw hole
14
Knob
15
Bolt
16
Battery release button
17
Spool cover
18
Tab
19
Spool
20
Spool housing
21
Anchor hole
22
Guide slot
23
Direction of rotation
A
Best cutting area
B
Dangerous cutting area
C
4 INSTALLATION
4.1 UNPACK THE MACHINE
Make sure that you correctly assemble the machine before
use.
• If parts of the machine are damaged, do not use the
machine.
• If parts are missing, do not operate the machine.
• If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
For your personal safety, do not insert battery before the
tool is assembled completely.
4
WARNING
WARNING
WARNING