KTM 63512932044 Instrucciones De Montaje página 29

Mounting
–
Move the key 45° to the right
The handle pops up automatically.
The cases are released and can be mounted or taken
off.
–
Position the right case
simultaneously, position it in the guides of the upper case
rack from above.
The case hooks are seated firmly in the upper case
500449-01
rack.
–
Push the handle all the way down and turn the key back
into top position
–
Position left case
neously, position it in the guides of the upper case rack,
from above, until it is firmly seated on the case rack.
The case hooks are seated firmly in the upper case
rack.
–
Push the handle all the way down and turn the key back
into top position
Info
500450-01
Always make sure that all accessory parts and lug-
gage are carefully attached. Check this regularly.
Removing the cases
–
Move the key 45° to the right
The handle pops up automatically.
The cases are released and can be mounted or taken
off.
–
Pull the case upward by the handle and remove it.
500451-01
–
Always use both side cases and distribute the load evenly
on both sides, as well as securing them against slipping.
500452-01
I
.
2
on the lower case rack and,
G
and remove the key.
1
on the lower case rack and, simulta-
G
and remove the key.
I
.
MOUNTING 5
11