6 CHANGING THE LOCKING CYLINDER
6.1
12
Changing the locking cylinder
500559-01
500482-01
500560-01
500561-01
500558-01
Removing the locking cylinder
–
Move the key 90° to the right
–
Open the case.
–
8
Remove screws
.
–
Pull the lock unit out of the guides.
–
9
Remove screws
from the lock unit.
–
Remove the cover.
–
bk
Remove plug
.
–
Move the key into top position
–
7
Push engaging plate
–
Remove the locking cylinder.
Info
It is essential that the key remains in the locking cylin-
der.
Installing the locking cylinder
–
6
Mount O-ring
(included).
Long-life grease (
–
Position and insert the locking cylinder as shown in the
figure (the catch must be facing downward).
7
Engaging plate
H
.
G
.
into the locking cylinder.
p. 15)
engages.