16.1 Appliance diagram
1 Control Panel
2 Connector for vacuum hose
3 Sealing profile (which presses the bag against the sealing bar)
4 Lower gasket + 5 Upper gasket
6 Sealing bar:
Contains a heating wire covered with teflon which allows the bag to
seal but not to stick to the wire. Place the bag over this sealing bar.
WARNING
The sealing bar gets very hot.
Please observe the following safety notice in order not to burn yourself or others.
► To avoid getting burned, never touch the sealing bar directly after sealing process.
Please note
► Do not remove the Teflon tape (T).
7 Vacuum chamber (with removable liquid tank)
8 Air intake: Air intake connects with vacuum chamber and pump.
9 Vacuum hose for example for vacuuming of canisters and wine stoppers
10 handle: Close the lid and press down the handle firmly until the first progress LED
lights up.
37