CASO DESIGN HC 170 Manual Del Usuario página 38

16.2 Control Panel
Indicator lamp Progress (Vorgang)
Indicates the progress of the operation. The first LED indicates that the handle is properly
closed. The last LED indicates the end of operation.
Buttons (indicator light shows selected function)
Button selectable sealing time (Schweißzeit Trocken & Feucht)
With this function you could adjust the sealing time to the consistency of your vacuum
food. Choose "Trocken" for dry vacuum food and "Feucht" for moist vacuum food where
liquid is produced. Please choose the corresponding sealing time before the vacuum
process.
Button Sealing function (Schweißen)
Seals a bag without first vacuuming
Button Vacuum & Seal / Cancel (Vakuum & Schweißen/Abbrechen)
Air is drawn off from inside the bag (vacuuming), immediately after this process the bag is
sealed
You can stop the vacuum and sealing process at any time
Button Adjustable Vacuum (Manuelles Vakuum)
As long as you press the button, air is drawn off from inside the bag. When you release the
button, this process will stop. Afterwards you must seal the bag via the seal function.
Button Canister Vacuum (Vakuum Behälter)
Via the vacuum hose, air is drawn off from inside the vacuum canister
16.3 Rating plate
The rating plate with the connection and performance data can be founded on the bottom
of the unit.
17 Operation
This chapter provides instructions on the proper operation of your vacuum sealer:
17.1 Basics of sealing
After each sealing session and before starting up, check to make sure the unit and all
accessories are clean and free of leftover food. Follow the cleaning instructions on in
Chapter Cleaning and Maintenance.
38